MT3i is a popular LS range of compact tractors.
The design of the tractors of the particular series is in accordance with
modern trends and at the same time, innovative and practical.
 |
Switch from 2WD to 4WD with a simple flick of a lever. |
 |
Independent PTO
Easy PTO operation with a switch. |
 |
Standard Synchronized Broadcast
12 forward / 12 reverse synchromesh transmission provides more operating speeds than other tractors in its class. |
 |
Side shifter
It maximizes space and makes it easier to get in and out of the tractor. |
 |
2 pairs of stays at the back
4 quick couplers on the back of the tractor to easily and quickly connect your machines without the extra high cost like others in its class. |
 |
3-point adjustable arms
Easy coupling of a wide variety of accessories with a maximum lift of 820 kg. |
 |
Hydraulic steering wheel with adjustment
It makes turning easier, improves control, reduces fatigue and improves comfort. |
 |
Ergonomic Loader Joystick (optional)
Easily accessible for maximum comfort and convenience. |
 |
Split bar
Serves in dense tree plantations of low height. Easier storage in low-rise buildings or sheds. |
 |
Wide variety of tires
Choose from agricultural, industrial and rubber turf. |
 |
Controller with sensitivity adjustment
Easily accessible for maximum comfort and convenience. |
 |
Target work light
Adjustable light to improve visibility where you need it. |
 |
Adjustable hook
It increases the utility of the tractor without the extra high cost like others in its class. |
 |
Power outlet
Provides electrical power for tools when needed. |
 |
Large fuel tank
It offers long working times. |
 |
Flat floor
Spacious and comfortable. |
 |
Mitsubishi engine STAGE V
It produces more power with less noise, fuel consumption, vibration and emissions. Warm-up starting aid, which helps start in cold weather. Includes engine speed control system. |
 |
Modern ergonomic design
Ergonomic design for the ultimate driving experience. |
 |
Easy opening hood
Provides access for easy maintenance. |
 |
Japanese Spec Differential
Reinforced differential with a maximum steering angle of 48° offering a minimum turning radius of 2.8m. |
| LS MT3.40 | |
| Dimensions and Weight | |
| Length (without counterweight) | 3137mm |
| Total width with tires | 1402mm |
| Wheelbase | 1754mm |
| Height | 2496mm (at wing 1227mm) |
| Total weight | 1.643kg |
| Trailer Load | 3,380kg |
| Tires | |
| Front | 7 – 16 |
| Back | 12.4 – 24 |
| Power take off (PTO) | |
| Type | Independent |
| Back revolutions/minute | 540/540E/1000 rpm |
| Hydraulic system | |
| Total feed | 51.9 |
| Steering Pump Liters/Minute | 20.8 |
| Pump-liters/minute | 31.1 |
| Tilt System Category | Category I |
| Lifting capacity | 820 |
| Hydraulic waits | 4 back |
| Engine | |
| Type | 3 cylinder, Indirect Injection |
| Model | Mitsubishi L3CRV-T4 |
| Max Engine Power | 49 HP |
| Engine Power | 41 HP |
| PTO Power | 32 HP |
| Cubism | 1879 cc |
| Tank capacity/liter | 32 lt |
| Transmission System | |
| Type | Sync |
| Number of gears | F12 x R12 |
| Working speed km/h | 1.1 ~ 27 (Synchro Shuttle) / 0 ~ 25.1 (HST) |
| Drive System | |
| Type | Hydrostatic |
| Minimum turning radius | 2.8 m |
| Max Address Angle | 48 ° |
| Remote control | |
| Type | Dual Power |
| No. quick links | 4 |
